Tag Archives: Gallon

Bathroom Water Saving Tips

Bathroom Water Saving Tips

Approximately 35% – 40% of household water use originates from the bathroom. By using a few of these water saving bathroom tips you can reduce water consumption in your bathroom.

If you are planning on renovating your bathroom or building a new bathroom there are a few items that you should consider that can help you conserve water and save money on electricity and water bills. Toilets are the largest water-using fixture inside the home. By installing more efficient 1.6 gallon per flush or less toilets, you can save thousands of gallons of water per toilet, per year.

How to Measure water flow rate

To find out the current water saving qualities of your bathroom taps and shower you can calculate their flow rate. Run a tap for 10 seconds into a bucket and multiply the amount by 6 to find out the flow rate per minute. For example, to find out how much water your shower head is consuming you can put a bucket under the shower. Turn it on for 10 seconds before turning it off. Measure the amount of water captured in the bucket, then multiply the amount by 6. This will give you the shower head flow rate per minute, if it is over 2 gallons of water per minute you should install a water saving shower head.

Shower Water Conservation

Older shower heads can use 5 gallons of water per minute. By installing a new water efficient shower head you drastically reduce the water your shower consumes. A 3 star shower head will use less than 2 gallons of water a minute, saving 12 gallons of water per person, per shower. This amounts to approximately 5,000 gallons of water per year per person. So for the approximate $15 cost of a water efficient shower head you could potentially save yourself around $100 in water bills. You can also capture the initial cold shower water in a bucket for use in water plants or garden.

Water Saving Toilet

Around 15% of household water is flushed down the toilet. Older toilets use around 3gallons of water per flush. There are a range of 4 star dual flush toilets that use around 1 gallon of water for a full flush and 3/4 gallon for a half flush.

Water Saving Bath

A short 4 minute shower will use less cold and hot water than having a bath. If you do have a bath then only fill it to a level that just covers your body. If you use natural soaps or detergents in your bath you can bucket the water out and use it to water your garden.

Sink water saving tips

A running tap can use approximately 4 gallons of water a minute. Turn off the tap while you brush your teeth. If shaving put some water into the sink to wash your blade instead of running the tap continuously. By installing flow restrictors or water saving taps you can reduce the water usage when you turn on the tap to brush your teeth or lather your hands with soap.

Leave a comment

Filed under Energy Conservation, Recycling, Water Conservation

Best Time to Replace Your Washer

When to Replace Your Washer

 If your washer is over ten years old, you could be paying more than $150 in additional energy costs per year. Consider replacing your old washer with one that is Energy Star qualified and reap the following benefits:
  • Reduce water usage to 30-35 gallons of water per load to 10-20 gallons.
  • The agitator has been removed in newer models allowing for more space for larger loads.
  • Take the savings from the reduced energy and water usage to buy a new energy efficient dryer.

Leave a comment

Filed under Energy Conservation, Technology, Water Conservation