How to Maintain Hot Water Heater

Tips to Properly Maintain Your Hot Water Heater


There are several easy and inexpensive ways to increase a water heater’s operating efficiency and operating life. Hot_Water_Tank

By following several of these tips, you can make your hot water less expensive:
  • Add an insulation blanket.
  • Inspect the flue for breaks or gaps that could leak deadly exhaust gas.
  • Twice a year, drain and flush sediment, which reduces efficiency in the water heater. If the level of sediment is in your water supply is high, this may need to be done more often.  To drain the tank, turn off the water supply at the tank top, hook a hose to the water spigot at the base, open a hot-water tap in the house and open the water spigot. Once the tank is drained, turn on the water supply at the top of the tank and let it run until the water draining out is clear. Close the spigot and turn off the tap.
  • Once a year, check the pressure-relief valve to make sure this crucial safety device isn’t clogged. To relieve any overpressurization in the tank, place a bucket beneath the copper overflow pipe. Carefully push the relief valve at the top and a burst of hot water should spray out. If not, the valve should be replaced.
  • Make sure a viable anode rod hangs in the tank to prevent rust out.
About these ads

Leave a comment

Filed under Energy Conservation, Home Winterization

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s